FASTPATH-QOS-COS-MIB :: agentCosQueueMgmtWredMinThreshold

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › FASTPATH-QOS-COS-MIB › agentCosQueueMgmtWredMinThreshold

agentCosQueueMgmtWredMinThreshold

Module: FASTPATH-QOS-COS-MIB

OID (symbolic): FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredMinThreshold

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.3

Node type: OBJECT-TYPE

Type: Sixteenths

Access: read-write

Description: Weighted RED minimum queue threshold, below which no packets are dropped for the current drop precedence level. The value specifies the threshold based on a fraction of the overall device queue size in terms of sixteenths (0/16, 1/16, 2/16, ... 16/16). Since device implementations vary, the actual value deployed may be rounded up or down accordingly.

The default value is calculated from the agentCosQueueIndex and agentCosQueueDropPrecIndex as shown in the following table (values listed for drop precedence levels 1, 2, and 3, respectively): Queue Index 0: 8, 6, 4 Queue Index 1: 9, 7, 5 Queue Index 2: 10, 8, 6 Queue Index 3: 11, 9, 7 Queue Index 4: 12, 10, 8 Queue Index 5: 13, 11, 9 Queue Index 6: 14, 12, 10 Queue Index 7: 15, 13, 11

This object is only used when agentCosQueueMgmtType is set to wred(2). Any value set for this object must be equal to or less than the value of agentCosQueueMgmtWredMaxThreshold.

What is agentCosQueueMgmtWredMinThreshold?

Obsolete object that set the WRED minimum queue threshold, as a fraction in sixteenths of overall queue size, below which no packets were dropped at this drop-precedence level; required to be at or below agentCosQueueMgmtWredMaxThreshold and only used with wred(2) management. Superseded by the percentage-based agentCosQueueMgmtPercentWredMinThreshold on current implementations.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.3
snmpwalk -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredMinThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.3.1
snmpget -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredMinThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.3.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentCosQueueMgmtWredMinThreshold.1

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-QOS-COS-MIB::agentCosQueueMgmtWredMinThreshold OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3fastPathQOSFASTPATH-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3fastPathQOSCOSFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2agentCosQueueCfgGroupFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5agentCosQueueMgmtTableFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1agentCosQueueMgmtEntryFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.3agentCosQueueMgmtWredMinThresholdFASTPATH-QOS-COS-MIB