All MIBs › FASTPATH-QOS-COS-MIB › agentCosQueueMaxBandwidth
agentCosQueueMaxBandwidth
Module: FASTPATH-QOS-COS-MIB
OID (symbolic): FASTPATH-QOS-COS-MIB::agentCosQueueMaxBandwidth
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.4
Node type: OBJECT-TYPE
Type: Percent
Access: read-write
Description: Maximum bandwidth allowed for this queue, typically used to shape the outbound transmission rate. The value is specified in terms of percentage of overall link speed for the port in 1% increments. A value of 0 means there is no maximum bandwidth limit in effect and that the queue is allowed to use any available excess bandwidth (i.e., work conserving method). The default value is 0.
When set to a non-zero value, the queue is restricted to using at most the bandwidth specified in this object for the outbound transmission rate (i.e., non-work-conserving method). Any non-zero value set for this object must be equal to or greater than the value of agentCosQueueMinBandwidth for the same agentCosQueueIndex on this interface.
What is agentCosQueueMaxBandwidth?
Sets the maximum bandwidth this queue is allowed to use, in 1% increments of link speed, with 0 (the default) meaning no cap (work-conserving, free to use excess capacity). Any non-zero value must be at least as large as the queue's agentCosQueueMinBandwidth, so raise the minimum first if you need to raise both together.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.4 snmpwalk -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosQueueMaxBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.4.1 snmpget -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosQueueMaxBandwidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.4.1 s <value>
Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-QOS-COS-MIB::agentCosQueueMaxBandwidth OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) from a single console.
OID Breakdown
Upper-level ancestors (14 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3 | fastPathQOS | FASTPATH-QOS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3 | fastPathQOSCOS | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2 | agentCosQueueCfgGroup | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4 | agentCosQueueTable | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1 | agentCosQueueEntry | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.4 | agentCosQueueMaxBandwidth | FASTPATH-QOS-COS-MIB |