FASTPATH-QOS-COS-MIB :: agentCosMapUntrustedTrafficClass

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › FASTPATH-QOS-COS-MIB › agentCosMapUntrustedTrafficClass

agentCosMapUntrustedTrafficClass

Module: FASTPATH-QOS-COS-MIB

OID (symbolic): FASTPATH-QOS-COS-MIB::agentCosMapUntrustedTrafficClass

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The traffic class (i.e. hardware queue) to which all untrusted traffic is assigned. This includes all traffic when the agentCosMapIntfTrustMode is set to untrusted(1), or just non-IP packets when in trustIpPrecedence(3) or trustIpDscp(4) modes.

This is a read-only object that reflects the current setting of the dot1dPortDefaultUserPriority object as mapped to a traffic class through the dot1dTrafficClassEntry.

What is agentCosMapUntrustedTrafficClass?

Reports the hardware queue (traffic class) that all untrusted traffic is assigned to on this interface -- meaning all traffic when the interface's trust mode is untrusted, or just non-IP packets under an IP-based trust mode. This read-only value mirrors the interface's dot1dPortDefaultUserPriority mapped through the standard bridge traffic-class table, so change the default priority there rather than trying to set this object directly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.3
snmpwalk -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosMapUntrustedTrafficClass

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.3.1
snmpget -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosMapUntrustedTrafficClass.1

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-QOS-COS-MIB::agentCosMapUntrustedTrafficClass OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3fastPathQOSFASTPATH-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3fastPathQOSCOSFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1agentCosMapCfgGroupFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3agentCosMapIntfTrustTableFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1agentCosMapIntfTrustEntryFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.3agentCosMapUntrustedTrafficClassFASTPATH-QOS-COS-MIB