FASTPATH-QOS-COS-MIB :: agentCosMapIntfTrustMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › FASTPATH-QOS-COS-MIB › agentCosMapIntfTrustMode

agentCosMapIntfTrustMode

Module: FASTPATH-QOS-COS-MIB

OID (symbolic): FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustMode

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The class of service trust mode of an interface. When set to a trusted mode, the appropriate COS mapping table is used as follows:

trustDot1p(2) : dot1dTrafficClassTable trustIpPrecedence(3): agentCosMapIpPrecTable trustIpDscp(4): agentCosMapIpDscpTable

For an untrusted(1) interface, packets are handled in accordance with the dot1dPortDefaultUserPriority value of the ingress port.

What is agentCosMapIntfTrustMode?

Sets the class-of-service trust mode for an interface: untrusted(1) ignores incoming markings and uses the port's default priority, while trustDot1p(2), trustIpPrecedence(3), and trustIpDscp(4) each direct the switch to honor a different incoming marking via its corresponding mapping table. Set this to untrusted on access ports facing untrusted end devices so they can't manipulate QoS by forging markings, and to a trust mode on links from devices you control.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2
snmpwalk -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2.1
snmpget -v2c -c public <target> FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2.1 i <value>

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FASTPATH-QOS-COS-MIB::agentCosMapIntfTrustMode OID value, configure state conditions and alerts, and monitor any Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (CoS queue configuration) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3fastPathQOSFASTPATH-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3fastPathQOSCOSFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1agentCosMapCfgGroupFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3agentCosMapIntfTrustTableFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1agentCosMapIntfTrustEntryFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2agentCosMapIntfTrustModeFASTPATH-QOS-COS-MIB