All MIBs › EdgeSwitch-ROUTING-MIB › agentRouterRipSplitHorizonMode
agentRouterRipSplitHorizonMode
Module: EdgeSwitch-ROUTING-MIB
OID (symbolic): EdgeSwitch-ROUTING-MIB::agentRouterRipSplitHorizonMode
OID (numeric): 1.3.6.1.4.1.4413.1.1.2.3.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
What is agentRouterRipSplitHorizonMode?
Selects RIP's split-horizon loop-prevention technique: none(1) disables it, simple(2) (the default) suppresses advertising a route back out the interface it was learned on, and poisonReverse(3) advertises it back with an infinite metric. Admins switch to poisonReverse on flaky or NBMA-style links where faster loop detection outweighs the extra bandwidth of poison-reverse updates.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.2.3.2 snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING-MIB::agentRouterRipSplitHorizonMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.2.3.2.1 snmpget -v2c -c public <target> EdgeSwitch-ROUTING-MIB::agentRouterRipSplitHorizonMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.2.3.2.1 i <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv4 static routing/L3 forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING-MIB::agentRouterRipSplitHorizonMode OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv4 static routing/L3 forwarding) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.2 | fastPathRouting | EdgeSwitch-ROUTING-MIB |
| 1.3.6.1.4.1.4413.1.1.2.3 | agentRouterRipConfigGroup | EdgeSwitch-ROUTING-MIB |
| 1.3.6.1.4.1.4413.1.1.2.3.2 | agentRouterRipSplitHorizonMode | EdgeSwitch-ROUTING-MIB |