All MIBs › EdgeSwitch-ROUTING-MIB › agentRouterRipHostRoutesAcceptMode
agentRouterRipHostRoutesAcceptMode
Module: EdgeSwitch-ROUTING-MIB
OID (symbolic): EdgeSwitch-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode
OID (numeric): 1.3.6.1.4.1.4413.1.1.2.3.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1).
What is agentRouterRipHostRoutesAcceptMode?
Controls whether the router accepts host routes (/32-style single-address routes) advertised by neighboring RIP routers into its routing table (default enable). Disabling it protects the routing table from being bloated by unnecessary host-specific entries from a misconfigured neighbor.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.2.3.4 snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.2.3.4.1 snmpget -v2c -c public <target> EdgeSwitch-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.2.3.4.1 i <value>
Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv4 static routing/L3 forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING-MIB::agentRouterRipHostRoutesAcceptMode OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv4 static routing/L3 forwarding) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.2 | fastPathRouting | EdgeSwitch-ROUTING-MIB |
| 1.3.6.1.4.1.4413.1.1.2.3 | agentRouterRipConfigGroup | EdgeSwitch-ROUTING-MIB |
| 1.3.6.1.4.1.4413.1.1.2.3.4 | agentRouterRipHostRoutesAcceptMode | EdgeSwitch-ROUTING-MIB |