EdgeSwitch-ROUTING-MIB :: agentOspfDefaultPassiveMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-ROUTING-MIB › agentOspfDefaultPassiveMode

agentOspfDefaultPassiveMode

Module: EdgeSwitch-ROUTING-MIB

OID (symbolic): EdgeSwitch-ROUTING-MIB::agentOspfDefaultPassiveMode

OID (numeric): 1.3.6.1.4.1.4413.1.1.2.4.19

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.

What is agentOspfDefaultPassiveMode?

When true, makes every OSPF-enabled interface passive by default (no Hellos, no adjacency formation) unless individually overridden; default false. Admins enable this on a router where only a few specific interfaces should actively run OSPF, then selectively un-set passive mode on just those.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.2.4.19
snmpwalk -v2c -c public <target> EdgeSwitch-ROUTING-MIB::agentOspfDefaultPassiveMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.2.4.19.1
snmpget -v2c -c public <target> EdgeSwitch-ROUTING-MIB::agentOspfDefaultPassiveMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.2.4.19.1 s <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv4 static routing/L3 forwarding) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-ROUTING-MIB::agentOspfDefaultPassiveMode OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (IPv4 static routing/L3 forwarding) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.2fastPathRoutingEdgeSwitch-ROUTING-MIB
1.3.6.1.4.1.4413.1.1.2.4agentRouterOspfConfigGroupEdgeSwitch-ROUTING-MIB
1.3.6.1.4.1.4413.1.1.2.4.19agentOspfDefaultPassiveModeEdgeSwitch-ROUTING-MIB