EdgeSwitch-QOS-ISCSI-MIB :: agentIscsiFlowAccelerationQosVptValue

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-QOS-ISCSI-MIB › agentIscsiFlowAccelerationQosVptValue

agentIscsiFlowAccelerationQosVptValue

Module: EdgeSwitch-QOS-ISCSI-MIB

OID (symbolic): EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosVptValue

OID (numeric): 1.3.6.1.4.1.4413.1.1.3.5.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of VPT value is 0..7

What is agentIscsiFlowAccelerationQosVptValue?

This read-write Unsigned32, constrained to 0 through 7, is the 802.1p VPT priority value applied to iSCSI packets when agentIscsiFlowAccelerationQosType is set to vpt. It only takes effect if the QoS type is VPT-based, letting an admin control the Layer 2 CoS priority given to iSCSI storage traffic relative to other traffic classes. An admin wanting iSCSI traffic to use the highest 802.1p priority queue would set agentIscsiFlowAccelerationQosVptValue to 7 while the QoS type is vpt.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.5.1.4
snmpwalk -v2c -c public <target> EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosVptValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.5.1.4.1
snmpget -v2c -c public <target> EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosVptValue.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.3.5.1.4.1 i <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (iSCSI Flow Acceleration QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosVptValue OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (iSCSI Flow Acceleration QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
1.3.6.1.4.1.4413.1.1.3fastPathQOSEdgeSwitch-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.3.5fastPathIscsiFlowAccelerationEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.1agentIscsiFlowAccelerationGlobalConfigGroupEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.1.4agentIscsiFlowAccelerationQosVptValueEdgeSwitch-QOS-ISCSI-MIB