EdgeSwitch-QOS-ISCSI-MIB :: agentIscsiFlowAccelerationQosDscpValue

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-QOS-ISCSI-MIB › agentIscsiFlowAccelerationQosDscpValue

agentIscsiFlowAccelerationQosDscpValue

Module: EdgeSwitch-QOS-ISCSI-MIB

OID (symbolic): EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosDscpValue

OID (numeric): 1.3.6.1.4.1.4413.1.1.3.5.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The value of VPT or DSCP, depends on agentIscsiFlowAccelerationQosType, that will be assigned to each iSCSI packet. The range of DSCP value is 0..63

What is agentIscsiFlowAccelerationQosDscpValue?

This read-write Unsigned32, constrained to 0 through 63, is the DSCP codepoint applied to iSCSI packets when agentIscsiFlowAccelerationQosType is set to dscp. It only takes effect if the QoS type is DSCP-based, giving an admin Layer 3 marking control for iSCSI traffic that will be honored across routed segments. An admin aligning iSCSI storage traffic with an existing expedited-forwarding policy would set agentIscsiFlowAccelerationQosDscpValue to 46 while the QoS type is dscp.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.5.1.5
snmpwalk -v2c -c public <target> EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosDscpValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.5.1.5.1
snmpget -v2c -c public <target> EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosDscpValue.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.3.5.1.5.1 i <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (iSCSI Flow Acceleration QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationQosDscpValue OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (iSCSI Flow Acceleration QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
1.3.6.1.4.1.4413.1.1.3fastPathQOSEdgeSwitch-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.3.5fastPathIscsiFlowAccelerationEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.1agentIscsiFlowAccelerationGlobalConfigGroupEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.1.5agentIscsiFlowAccelerationQosDscpValueEdgeSwitch-QOS-ISCSI-MIB