EdgeSwitch-QOS-ISCSI-MIB :: agentIscsiFlowAccelerationConnectionInitiatorPort

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-QOS-ISCSI-MIB › agentIscsiFlowAccelerationConnectionInitiatorPort

agentIscsiFlowAccelerationConnectionInitiatorPort

Module: EdgeSwitch-QOS-ISCSI-MIB

OID (symbolic): EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionInitiatorPort

OID (numeric): 1.3.6.1.4.1.4413.1.1.3.5.4.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: The TCP port of connection initiator.

What is agentIscsiFlowAccelerationConnectionInitiatorPort?

This read-only Unsigned32 reports the TCP port number on the initiator side of a tracked iSCSI connection. Since this is typically an ephemeral client-side port, it mainly helps an admin distinguish between multiple simultaneous connections from the same initiator address. An admin seeing several connection rows with the same agentIscsiFlowAccelerationConnectionInitiatorAddr but different agentIscsiFlowAccelerationConnectionInitiatorPort values knows the initiator has multiple concurrent iSCSI connections open.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.5.4.1.5
snmpwalk -v2c -c public <target> EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionInitiatorPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.3.5.4.1.5.1
snmpget -v2c -c public <target> EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionInitiatorPort.1

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (iSCSI Flow Acceleration QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-QOS-ISCSI-MIB::agentIscsiFlowAccelerationConnectionInitiatorPort OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (iSCSI Flow Acceleration QoS) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
1.3.6.1.4.1.4413.1.1.3fastPathQOSEdgeSwitch-QOS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.3.5fastPathIscsiFlowAccelerationEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.4agentIscsiFlowAccelerationConnectionTableEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.4.1agentIscsiFlowAccelerationConnectionEntryEdgeSwitch-QOS-ISCSI-MIB
1.3.6.1.4.1.4413.1.1.3.5.4.1.5agentIscsiFlowAccelerationConnectionInitiatorPortEdgeSwitch-QOS-ISCSI-MIB