EdgeSwitch-POWER-ETHERNET-MIB :: agentPethPowerLimitMin

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-POWER-ETHERNET-MIB › agentPethPowerLimitMin

agentPethPowerLimitMin

Module: EdgeSwitch-POWER-ETHERNET-MIB

OID (symbolic): EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMin

OID (numeric): 1.3.6.1.4.1.4413.1.1.15.1.1.1.11

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: The minimum power this port can be configured to provide, measured in Milliwatts.

What is agentPethPowerLimitMin?

This read-only value, measured in milliwatts, reports the minimum amount of Power over Ethernet (PoE) power that a given switch port can be configured to supply to a connected device. An administrator checks this when planning power budgets or troubleshooting a PoE device that isn't getting enough power, to understand the lower bound the port's hardware actually supports. For example, this might report a value like 1000 (1 watt), the floor below which the port's PoE controller can't be configured to deliver power.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.15.1.1.1.11
snmpwalk -v2c -c public <target> EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.15.1.1.1.11.1
snmpget -v2c -c public <target> EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMin.1

Start monitoring Ubiquiti EdgeSwitch PoE switch (extended PoE/PoE+ hardware reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMin OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch PoE switch (extended PoE/PoE+ hardware reporting) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.15fastPathpowerEthernetMIBEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1agentPethObjectsEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1.1agentPethPsePortTableEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1.1.1agentPethPsePortEntryEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1.1.1.11agentPethPowerLimitMinEdgeSwitch-POWER-ETHERNET-MIB