All MIBs › EdgeSwitch-POWER-ETHERNET-MIB › agentPethPowerLimitMax
agentPethPowerLimitMax
Module: EdgeSwitch-POWER-ETHERNET-MIB
OID (symbolic): EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMax
OID (numeric): 1.3.6.1.4.1.4413.1.1.15.1.1.1.12
Node type: OBJECT-TYPE
Type: Gauge32
Access: read-only
Description: The maximum power this port can be configured to provide, measured in Milliwatts.
What is agentPethPowerLimitMax?
This read-only value, measured in milliwatts, reports the maximum amount of PoE power a given switch port's hardware can be configured to deliver, the upper bound complementing agentPethPowerLimitMin. An administrator references this when sizing PoE devices, like PTZ cameras or Wi-Fi access points, to a port to confirm the port's power ceiling is sufficient for what's being plugged in. For example, this might report a value like 30000 (30 watts), matching the ceiling needed to power a PoE+ device such as a pan-tilt-zoom camera.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.15.1.1.1.12 snmpwalk -v2c -c public <target> EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.15.1.1.1.12.1 snmpget -v2c -c public <target> EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMax.1
Start monitoring Ubiquiti EdgeSwitch PoE switch (extended PoE/PoE+ hardware reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-POWER-ETHERNET-MIB::agentPethPowerLimitMax OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch PoE switch (extended PoE/PoE+ hardware reporting) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.15 | fastPathpowerEthernetMIB | EdgeSwitch-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4413.1.1.15.1 | agentPethObjects | EdgeSwitch-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4413.1.1.15.1.1 | agentPethPsePortTable | EdgeSwitch-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1 | agentPethPsePortEntry | EdgeSwitch-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4413.1.1.15.1.1.1.12 | agentPethPowerLimitMax | EdgeSwitch-POWER-ETHERNET-MIB |