EdgeSwitch-POWER-ETHERNET-MIB :: agentPethFaultStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-POWER-ETHERNET-MIB › agentPethFaultStatus

agentPethFaultStatus

Module: EdgeSwitch-POWER-ETHERNET-MIB

OID (symbolic): EdgeSwitch-POWER-ETHERNET-MIB::agentPethFaultStatus

OID (numeric): 1.3.6.1.4.1.4413.1.1.15.1.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action. A value of thermalShutdown(5) specifies that the thermal threshold has exceeded for the pse port. A value of startupFailure(6) as fault status indicates that the port does not have sufficient voltage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.15.1.1.1.9
snmpwalk -v2c -c public <target> EdgeSwitch-POWER-ETHERNET-MIB::agentPethFaultStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.15.1.1.1.9.1
snmpget -v2c -c public <target> EdgeSwitch-POWER-ETHERNET-MIB::agentPethFaultStatus.1

Start monitoring Ubiquiti EdgeSwitch PoE switch (extended PoE/PoE+ hardware reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-POWER-ETHERNET-MIB::agentPethFaultStatus OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch PoE switch (extended PoE/PoE+ hardware reporting) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.15fastPathpowerEthernetMIBEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1agentPethObjectsEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1.1agentPethPsePortTableEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1.1.1agentPethPsePortEntryEdgeSwitch-POWER-ETHERNET-MIB
1.3.6.1.4.1.4413.1.1.15.1.1.1.9agentPethFaultStatusEdgeSwitch-POWER-ETHERNET-MIB