EdgeSwitch-LLPF-PRIVATE-MIB :: agentSwitchLlpfPortBlockMode

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › EdgeSwitch-LLPF-PRIVATE-MIB › agentSwitchLlpfPortBlockMode

agentSwitchLlpfPortBlockMode

Module: EdgeSwitch-LLPF-PRIVATE-MIB

OID (symbolic): EdgeSwitch-LLPF-PRIVATE-MIB::agentSwitchLlpfPortBlockMode

OID (numeric): 1.3.6.1.4.1.4413.1.1.48.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Port's LLPF mode. It can be either enabled or disabled default will be disable.

What is agentSwitchLlpfPortBlockMode?

This setting turns Link-Layer Protocol Filtering (LLPF) on or off for a specific switch port, controlling whether the switch blocks certain Layer-2 control-protocol frames arriving on that port. An admin enables it on ports facing untrusted or third-party equipment to stop unwanted L2 control traffic from being processed or forwarded through that port. Since the mode defaults to disabled(2), hardening a specific access port would mean explicitly setting this value to enable(1) for that port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.48.1.1.1.2
snmpwalk -v2c -c public <target> EdgeSwitch-LLPF-PRIVATE-MIB::agentSwitchLlpfPortBlockMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.48.1.1.1.2.1
snmpget -v2c -c public <target> EdgeSwitch-LLPF-PRIVATE-MIB::agentSwitchLlpfPortBlockMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.48.1.1.1.2.1 i <value>

Start monitoring Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (Link Local Protocol Filtering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-LLPF-PRIVATE-MIB::agentSwitchLlpfPortBlockMode OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch (Broadcom FastPath-based) switch (Link Local Protocol Filtering) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4413broadcomBASP-Config-MIB
1.3.6.1.4.1.4413.1enetBASP-Config-MIB
1.3.6.1.4.1.4413.1.1fastPathEdgeSwitch-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4413.1.1.48fastPathLlpfEdgeSwitch-LLPF-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.48.1agentSwitchLlpfGroupEdgeSwitch-LLPF-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.48.1.1agentSwitchLlpfPortConfigTableEdgeSwitch-LLPF-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.48.1.1.1agentSwitchLlpfPortConfigEntryEdgeSwitch-LLPF-PRIVATE-MIB
1.3.6.1.4.1.4413.1.1.48.1.1.1.2agentSwitchLlpfPortBlockModeEdgeSwitch-LLPF-PRIVATE-MIB