All MIBs › EdgeSwitch-CAPTIVE-PORTAL-MIB › cpCaptivePortalInstanceBlockStatus
cpCaptivePortalInstanceBlockStatus
Module: EdgeSwitch-CAPTIVE-PORTAL-MIB
OID (symbolic): EdgeSwitch-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceBlockStatus
OID (numeric): 1.3.6.1.4.1.4413.1.1.38.2.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Block or unblock the captive portal instance for authentications using the following values:
blockPending(0) - Set to this value to block the captive portal instance for authentications. After setting this value, the status displayed is blocked(1). notBlockPending(2) - Set to this value to unblock the captive portal instance for authentications. After setting this value, the status displayed is notBlocked(3).
What is cpCaptivePortalInstanceBlockStatus?
Read/write control to manually block or unblock a captive portal instance from accepting new authentications: set blockPending(0) to block it (status then reads blocked(1)) or notBlockPending(2) to unblock it (status then reads notBlocked(3), the default). Use this to temporarily suspend logins on one portal, e.g. during maintenance, without disabling the whole instance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.38.2.2.1.1.3 snmpwalk -v2c -c public <target> EdgeSwitch-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceBlockStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4413.1.1.38.2.2.1.1.3.1 snmpget -v2c -c public <target> EdgeSwitch-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceBlockStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4413.1.1.38.2.2.1.1.3.1 i <value>
Start monitoring Ubiquiti EdgeSwitch managed Ethernet switch (captive portal) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EdgeSwitch-CAPTIVE-PORTAL-MIB::cpCaptivePortalInstanceBlockStatus OID value, configure state conditions and alerts, and monitor any Ubiquiti EdgeSwitch managed Ethernet switch (captive portal) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4413 | broadcom | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1 | enet | BASP-Config-MIB |
| 1.3.6.1.4.1.4413.1.1 | fastPath | EdgeSwitch-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4413.1.1.38 | fastPathCaptivePortal | EdgeSwitch-CAPTIVE-PORTAL-MIB |
| 1.3.6.1.4.1.4413.1.1.38.2 | cpStatusGroup | EdgeSwitch-CAPTIVE-PORTAL-MIB |
| 1.3.6.1.4.1.4413.1.1.38.2.2 | cpCaptivePortalInstanceStatusGroup | EdgeSwitch-CAPTIVE-PORTAL-MIB |
| 1.3.6.1.4.1.4413.1.1.38.2.2.1 | cpCaptivePortalInstanceStatusTable | EdgeSwitch-CAPTIVE-PORTAL-MIB |
| 1.3.6.1.4.1.4413.1.1.38.2.2.1.1 | cpCaptivePortalInstanceStatusEntry | EdgeSwitch-CAPTIVE-PORTAL-MIB |
| 1.3.6.1.4.1.4413.1.1.38.2.2.1.1.3 | cpCaptivePortalInstanceBlockStatus | EdgeSwitch-CAPTIVE-PORTAL-MIB |