All MIBs › EXTREME-POE-MIB › extremePethSlotPoeStatus
extremePethSlotPoeStatus
Module: EXTREME-POE-MIB
OID (symbolic): EXTREME-POE-MIB::extremePethSlotPoeStatus
OID (numeric): 1.3.6.1.4.1.1916.1.27.1.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Describes the status of the PoE system on the slot. initializing - PoE controller is under initialization, operational - PoE controller is operational and is ready or providing power, downloadFail - PoE controller required update and the update failed, PoE reset is required to re-update, calibrationRequired - PoE contoller is operational, however calibration is required to provide power, invalidFirmware - PoE controller contains invalid firmware, mismatchVersion - PoE controller update completed, however version mismatches expected, reboot, updating - PoE controller is being updated, invalidDevice - PoE controller detected an invalid/bad PoE device. notOperational - PoE controller is not yet operational other - PoE controller is in undefined stats.
What is extremePethSlotPoeStatus?
This reports the operational status of the PoE controller hardware on a given switch slot, such as initializing, operational, or various failure states. Admins check this to diagnose why PoE isn't working on a slot, since values like downloadFail or invalidFirmware point to specific hardware or firmware problems needing a reset or update. A status of calibrationRequired(4) tells the admin the PoE controller needs calibration before it can reliably supply power to connected devices on that slot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1916.1.27.1.2.1.8 snmpwalk -v2c -c public <target> EXTREME-POE-MIB::extremePethSlotPoeStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1916.1.27.1.2.1.8.1 snmpget -v2c -c public <target> EXTREME-POE-MIB::extremePethSlotPoeStatus.1
Start monitoring Extreme Networks modular/stackable switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXTREME-POE-MIB::extremePethSlotPoeStatus OID value, configure state conditions and alerts, and monitor any Extreme Networks modular/stackable switch (Power over Ethernet) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1916 | extremenetworks | EXTREME-BASE-MIB |
| 1.3.6.1.4.1.1916.1 | extremeAgent | EXTREME-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1916.1.27 | extremePoE | EXTREME-POE-MIB |
| 1.3.6.1.4.1.1916.1.27.1 | extremePethMain | EXTREME-POE-MIB |
| 1.3.6.1.4.1.1916.1.27.1.2 | extremePethPseSlotTable | EXTREME-POE-MIB |
| 1.3.6.1.4.1.1916.1.27.1.2.1 | extremePethPseSlotEntry | EXTREME-POE-MIB |
| 1.3.6.1.4.1.1916.1.27.1.2.1.8 | extremePethSlotPoeStatus | EXTREME-POE-MIB |