All MIBs › EXPRESSION-MIB › expExpressionDeltaInterval
expExpressionDeltaInterval
Module: EXPRESSION-MIB
OID (symbolic): EXPRESSION-MIB::expExpressionDeltaInterval
OID (numeric): 1.3.6.1.4.1.9.10.22.1.3.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Sampling interval for objects in this expression with expObjectSampleType 'deltaValue'.
This object is not instantiated if not applicable.
A value of 0 indicates no automated sampling. In this case the delta is the difference from the last time the expression was evaluated. Note that this is subject to unpredictable delta times in the face of retries or multiple managers.
A value greater than zero is the number of seconds between automated samples.
Until the delta interval has expired once the delta for the object is effectively not instantiated and evaluating the expression has results as if the object itself were not instantiated.
Note that delta values potentially consume large amounts of system CPU and memory. Delta state and processing must continue constantly even if the expression is not being used. That is, the expression is being evaluated every delta interval, even if no application is reading those values. For wildcarded objects this can be substantial overhead.
Note that delta intervals, external expression value sampling intervals and delta intervals for expressions within other expressions can have unusual interactions as they are impossible to synchronize accurately. In general one interval embedded below another must be enough shorter that the higher sample sees relatively smooth, predictable behavior.
What is expExpressionDeltaInterval?
A read-write Integer32 (0-86400 seconds) setting how often deltaValue-sampled objects in this expression are re-sampled; a value of 0 instead computes the delta from whenever the expression was last evaluated, which can vary unpredictably between polls.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.22.1.3.1.1.5 snmpwalk -v2c -c public <target> EXPRESSION-MIB::expExpressionDeltaInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.22.1.3.1.1.5.1 snmpget -v2c -c public <target> EXPRESSION-MIB::expExpressionDeltaInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.22.1.3.1.1.5.1 i <value>
Start monitoring SNMP-managed network device or host, any vendor (derived/computed MIB expressions, vendor-neutral IETF draft) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EXPRESSION-MIB::expExpressionDeltaInterval OID value, configure state conditions and alerts, and monitor any SNMP-managed network device or host, any vendor (derived/computed MIB expressions, vendor-neutral IETF draft) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.22 | expressionMIB | EXPRESSION-MIB |
| 1.3.6.1.4.1.9.10.22.1 | expressionMIBObjects | EXPRESSION-MIB |
| 1.3.6.1.4.1.9.10.22.1.3 | expDefine | EXPRESSION-MIB |
| 1.3.6.1.4.1.9.10.22.1.3.1 | expExpressionTable | EXPRESSION-MIB |
| 1.3.6.1.4.1.9.10.22.1.3.1.1 | expExpressionEntry | EXPRESSION-MIB |
| 1.3.6.1.4.1.9.10.22.1.3.1.1.5 | expExpressionDeltaInterval | EXPRESSION-MIB |