ETH-OPT-MIB :: cdx6500dot3IfIndex

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › ETH-OPT-MIB › cdx6500dot3IfIndex

cdx6500dot3IfIndex

Module: ETH-OPT-MIB

OID (symbolic): ETH-OPT-MIB::cdx6500dot3IfIndex

OID (numeric): 1.3.6.1.4.1.449.2.1.2.1.1.8.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object is the port number for the Interface.

What is cdx6500dot3IfIndex?

The port number of this 802.3 Ethernet interface on a Codex 6500 device, used as the index into the port configuration table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.8.1.1
snmpwalk -v2c -c public <target> ETH-OPT-MIB::cdx6500dot3IfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.449.2.1.2.1.1.8.1.1.1
snmpget -v2c -c public <target> ETH-OPT-MIB::cdx6500dot3IfIndex.1

Start monitoring Codex 6500-series chassis switch (per-port protocol group config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ETH-OPT-MIB::cdx6500dot3IfIndex OID value, configure state conditions and alerts, and monitor any Codex 6500-series chassis switch (per-port protocol group config) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.449codexALC-OPT-MIB
1.3.6.1.4.1.449.2cdxProductSpecificALC-OPT-MIB
1.3.6.1.4.1.449.2.1cdx6500ALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2cdx6500ConfigurationALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1cdx6500CfgProtocolGroupALC-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1cdx6500PCTPortProtocolGroupALC-OPT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.449.2.1.2.1.1.8cdx6500PPCTdot3PortTableETH-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.8.1cdx6500PPCTdot3PortEntryETH-OPT-MIB
1.3.6.1.4.1.449.2.1.2.1.1.8.1.1cdx6500dot3IfIndexETH-OPT-MIB

Module

This MIB depends on