All MIBs › ESWITCH-MIB-V3-0 › eSwitchSecurityPortViolationResponse
eSwitchSecurityPortViolationResponse
Module: ESWITCH-MIB-V3-0
OID (symbolic): ESWITCH-MIB-V3-0::eSwitchSecurityPortViolationResponse
OID (numeric): 1.3.6.1.4.1.36.2.18.11.7.5.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The policy for dealing with security violations on this switch port. A security violation is deemed to have occured, when a frame with an unauthorized source address is received on a port.
A value of filter(1) indicates that frame with source addresses that are not authorized on the port will be silently filtered. If this object is set to the filter-and-log(2), frames with unauthorized source addresses will be filtered, and the security violation logged in the following table: eSwitchSecurityLogTable. If this object is set to the value shutdown-and-log(3), the port is entirely shut down when a frame with an unauthorized source address is received on the port. The port remains shut down until management brings up the port by setting the following MIB object to the value connected(1): eSwitchPortStatus.
What is eSwitchSecurityPortViolationResponse?
Chooses how the switch reacts to a security violation on this port: filter(1) silently drops the offending frames, filter-and-log(2) also records the event in the security log table, and shutdown-and-log(3) shuts the entire port down, requiring an admin to manually re-enable it via eSwitchPortStatus; an admin picks shutdown-and-log for the strictest response to unauthorized access attempts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.7.5.2.1.4 snmpwalk -v2c -c public <target> ESWITCH-MIB-V3-0::eSwitchSecurityPortViolationResponse
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.7.5.2.1.4.1 snmpget -v2c -c public <target> ESWITCH-MIB-V3-0::eSwitchSecurityPortViolationResponse.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.7.5.2.1.4.1 i <value>
Start monitoring DEC/Digital Equipment eSwitch managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESWITCH-MIB-V3-0::eSwitchSecurityPortViolationResponse OID value, configure state conditions and alerts, and monitor any DEC/Digital Equipment eSwitch managed Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-CHASSIS-MIB-V3-0 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.7 | eSwitch | ESWITCH-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.7.5 | eSwitchSecurity | ESWITCH-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.7.5.2 | eSwitchSecurityPortTable | ESWITCH-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1 | eSwitchSecurityPortEntry | ESWITCH-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.7.5.2.1.4 | eSwitchSecurityPortViolationResponse | ESWITCH-MIB-V3-0 |