All MIBs › ESAFE-MIB › esafeProvisioningStatusFailureFound
esafeProvisioningStatusFailureFound
Module: ESAFE-MIB
OID (symbolic): ESAFE-MIB::esafeProvisioningStatusFailureFound
OID (numeric): 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: true(1) indicates that the eSAFE encountered an error condition during the provisioning process. An eSAFE could start a looping process from a previous flow step after a failure, therefore this value is retained until the flow step that initially failed eventually passes or is updated with another error condition.
The eSAFE device needs to reflect in the value of 'esafePsProvisioningStatusFailureFound' any recognized errors even if it is still in the process of provisioning, i.e., when esafeProvisioningStatusProgress has a value of inProgress(2). Other eSAFE specifications provide the requirements for those eSAFE devices with respect to this object.
What is esafeProvisioningStatusFailureFound?
This flag indicates whether the eSAFE device encountered an error during its provisioning process. It stays true even while the eSAFE loops back and retries from the failing step, until that step eventually succeeds or a different error replaces it, so an admin should check it even while esafeProvisioningStatusProgress still shows inProgress. For example, true(1) reported by an eMTA stuck retrying the same step would prompt the admin to inspect esafeProvisioningStatusFailureFlow and FailureErrorText next.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.2 snmpwalk -v2c -c public <target> ESAFE-MIB::esafeProvisioningStatusFailureFound
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.2.1 snmpget -v2c -c public <target> ESAFE-MIB::esafeProvisioningStatusFailureFound.1
Start monitoring Cable modem/gateway with embedded eSAFE service applications (DOCSIS CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESAFE-MIB::esafeProvisioningStatusFailureFound OID value, configure state conditions and alerts, and monitor any Cable modem/gateway with embedded eSAFE service applications (DOCSIS CPE) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.14 | esafeMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.14.1 | esafeMibObjects | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1 | esafeBase | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1 | esafeProvisioningStatusTable | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1 | esafeProvisioningStatusEntry | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.2 | esafeProvisioningStatusFailureFound | ESAFE-MIB |