All MIBs › ESAFE-MIB › esafeProvisioningStatusFailureFlow
esafeProvisioningStatusFailureFlow
Module: ESAFE-MIB
OID (symbolic): ESAFE-MIB::esafeProvisioningStatusFailureFlow
OID (numeric): 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.3
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-only
Description: If esafeProvisioningStatusFailureFound is true(1) this object contains the label for the provisioning flow step in which the error condition was encountered, otherwise an empty value is reported.
The value of this object corresponds to the provisioning sequence 'Flow Step' designator for the associated eSAFE, as defined in the eSAFE specification. For example, an ePS will report a value such as CHPSWMD-1, and an eMTA will report a value such as MTA-1. Other eSAFE specifications provide the requirements for those eSAFE devices with respect to this object.
What is esafeProvisioningStatusFailureFlow?
This label identifies which provisioning flow step failed, and is only populated when esafeProvisioningStatusFailureFound is true. An admin uses it to pinpoint exactly where in the eSAFE's multi-step provisioning sequence the failure occurred, rather than just knowing something failed. For example, an ePS eSAFE might report CHPSWMD-1 while an eMTA eSAFE reports MTA-1, each naming a distinct flow step defined in its own spec.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.3 snmpwalk -v2c -c public <target> ESAFE-MIB::esafeProvisioningStatusFailureFlow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.3.1 snmpget -v2c -c public <target> ESAFE-MIB::esafeProvisioningStatusFailureFlow.1
Start monitoring Cable modem/gateway with embedded eSAFE service applications (DOCSIS CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESAFE-MIB::esafeProvisioningStatusFailureFlow OID value, configure state conditions and alerts, and monitor any Cable modem/gateway with embedded eSAFE service applications (DOCSIS CPE) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.14 | esafeMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.14.1 | esafeMibObjects | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1 | esafeBase | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1 | esafeProvisioningStatusTable | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1 | esafeProvisioningStatusEntry | ESAFE-MIB |
| 1.3.6.1.4.1.4491.2.1.14.1.1.1.1.3 | esafeProvisioningStatusFailureFlow | ESAFE-MIB |