ESAFE-MIB :: esafeDevServiceIntImpactInfo

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ESAFE-MIB › esafeDevServiceIntImpactInfo

esafeDevServiceIntImpactInfo

Module: ESAFE-MIB

OID (symbolic): ESAFE-MIB::esafeDevServiceIntImpactInfo

OID (numeric): 1.3.6.1.4.1.4491.2.1.14.1.1.2.1.2

Node type: OBJECT-TYPE

Type: SnmpAdminString

Access: read-only

Description: This object provides more information to the SNMP Managers regarding the condition reported in esafeDevServiceIntImpact. The eSAFE device vendor could use this to fill in specific vendor strings or values that could add value or provide more information related to the status. Examples: For eMTA devices: Lines 1 and 3 have active connections, Line 2 is not provisioned. For other eSAFE devices: Critical video streaming in progress, please wait for 5.30 minutes . The device MUST report 'No Additional Information' in case the associated eSAFE vendor cannot obtain information from the eSAFE device.

What is esafeDevServiceIntImpactInfo?

This is free-text detail supplementing the esafeDevServiceIntImpact rating, vendor-populated with device-specific status information. An admin reads it for the specifics behind the impact assessment, since the device reports "No Additional Information" if it can't obtain more detail from the eSAFE. For example, an eMTA might report "Lines 1 and 3 have active connections, Line 2 is not provisioned," pinpointing which line is affected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.14.1.1.2.1.2
snmpwalk -v2c -c public <target> ESAFE-MIB::esafeDevServiceIntImpactInfo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.14.1.1.2.1.2.1
snmpget -v2c -c public <target> ESAFE-MIB::esafeDevServiceIntImpactInfo.1

Start monitoring Cable modem/gateway with embedded eSAFE service applications (DOCSIS CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ESAFE-MIB::esafeDevServiceIntImpactInfo OID value, configure state conditions and alerts, and monitor any Cable modem/gateway with embedded eSAFE service applications (DOCSIS CPE) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4491cableLabsCLAB-DEF-MIB
1.3.6.1.4.1.4491.2clabProjectCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1clabProjDocsisCLAB-DEF-MIB
1.3.6.1.4.1.4491.2.1.14esafeMibCLAB-DEF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4491.2.1.14.1esafeMibObjectsESAFE-MIB
1.3.6.1.4.1.4491.2.1.14.1.1esafeBaseESAFE-MIB
1.3.6.1.4.1.4491.2.1.14.1.1.2esafeDevStatusTableESAFE-MIB
1.3.6.1.4.1.4491.2.1.14.1.1.2.1esafeDevStatusEntryESAFE-MIB
1.3.6.1.4.1.4491.2.1.14.1.1.2.1.2esafeDevServiceIntImpactInfoESAFE-MIB