ERPS-MIB :: swERPSMgmtRAPSRevertive

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ERPS-MIB › swERPSMgmtRAPSRevertive

swERPSMgmtRAPSRevertive

Module: ERPS-MIB

OID (symbolic): ERPS-MIB::swERPSMgmtRAPSRevertive

OID (numeric): 1.3.6.1.4.1.171.12.78.3.1.1.24

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link.

What is swERPSMgmtRAPSRevertive?

Whether this ring uses revertive(1, the default) or non-revertive(2) recovery behavior: when enabled, traffic automatically switches back to the working transport link once a failure clears (after swERPSMgmtRAPSWTRTime); when disabled, traffic continues using the RPL path even after recovery until manually restored. Admins disable revertive mode on rings where they want to control the timing of switchback manually.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.78.3.1.1.24
snmpwalk -v2c -c public <target> ERPS-MIB::swERPSMgmtRAPSRevertive

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.78.3.1.1.24.1
snmpget -v2c -c public <target> ERPS-MIB::swERPSMgmtRAPSRevertive.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.78.3.1.1.24.1 i <value>

Start monitoring Carrier Ethernet switch/node in a ring topology (ITU-T G.8032 ERPS, vendor-neutral standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ERPS-MIB::swERPSMgmtRAPSRevertive OID value, configure state conditions and alerts, and monitor any Carrier Ethernet switch/node in a ring topology (ITU-T G.8032 ERPS, vendor-neutral standard) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.78swERPSMIBERPS-MIB
1.3.6.1.4.1.171.12.78.3swERPSMgmtERPS-MIB
1.3.6.1.4.1.171.12.78.3.1swERPSMgmtRAPSVlanTableERPS-MIB
1.3.6.1.4.1.171.12.78.3.1.1swERPSMgmtRAPSVlanEntryERPS-MIB
1.3.6.1.4.1.171.12.78.3.1.1.24swERPSMgmtRAPSRevertiveERPS-MIB