All MIBs › ELTEX-MES-IF-EXTENSION-MIB › eltIfDot1qCustomIngressEtherType5
eltIfDot1qCustomIngressEtherType5
Module: ELTEX-MES-IF-EXTENSION-MIB
OID (symbolic): ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType5
OID (numeric): 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The custom ethertype to classify ingress vlan tags (SVLAN) for the interface to interoperate with third party vendor's system that do not use the standard 0x8100 ethertype to identify 802.1q-tagged frames.
What is eltIfDot1qCustomIngressEtherType5?
This read-write Integer32, indexed by ifIndex and restricted to values other than the standard 0x8100, is the fourth additional custom EtherType slot available for the interface to recognize ingress S-VLAN tags from non-standard third-party equipment. Admins use it in larger multi-vendor aggregation scenarios where several distinct custom EtherTypes must all be classified on the same port. For example, an admin consolidating traffic from five different legacy vendors' devices onto one uplink could populate eltIfDot1qCustomIngressEtherType5 with the fifth vendor's specific EtherType value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5 snmpwalk -v2c -c public <target> ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType5
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5.1 snmpget -v2c -c public <target> ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType5.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5.1 i <value>
Start monitoring Eltex MES-series Ethernet switch (custom 802.1Q EtherType/QinQ) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType5 OID value, configure state conditions and alerts, and monitor any Eltex MES-series Ethernet switch (custom 802.1Q EtherType/QinQ) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.35265 | eltexLtd | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1 | elHardware | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1.23 | eltMes | ELTEX-MES |
| 1.3.6.1.4.1.35265.1.23.1 | eltMesMng | ELTEX-MES |
| 1.3.6.1.4.1.35265.1.23.1.276 | eltMesIfExtensionMIB | ELTEX-MES-MNG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.35265.1.23.1.276.1 | eltMesIfExtensionMIBObjects | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3 | eltMesIfExtDot1qCustomEtherType | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3.2 | eltIfDot1qCustomIngressEtherTypeTable | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1 | eltIfDot1qCustomIngressEtherTypeEntry | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.5 | eltIfDot1qCustomIngressEtherType5 | ELTEX-MES-IF-EXTENSION-MIB |