All MIBs › ELTEX-MES-IF-EXTENSION-MIB › eltIfDot1qCustomIngressEtherType1
eltIfDot1qCustomIngressEtherType1
Module: ELTEX-MES-IF-EXTENSION-MIB
OID (symbolic): ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType1
OID (numeric): 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This fields holds default ethertype 0x8100 or zero if ethertype 0x8100 is not used to classify SVLAN on current interface.
What is eltIfDot1qCustomIngressEtherType1?
This read-write Integer32, indexed by ifIndex and restricted to the values 0 or 33024 (0x8100), holds the default EtherType used to classify the outer S-VLAN tag on ingress for this interface, with 0 meaning the standard 0x8100 EtherType is not used for that classification. Admins leave this at its default of 33024 in normal 802.1q deployments, only setting it to 0 when the interface instead relies solely on the custom EtherType slots (types 2-7) to classify S-VLAN tags. For example, a port interoperating exclusively with a third-party device using a non-standard tag EtherType would have eltIfDot1qCustomIngressEtherType1 set to 0, deferring S-VLAN classification entirely to the custom EtherType values configured elsewhere in the entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1 snmpwalk -v2c -c public <target> ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1.1 snmpget -v2c -c public <target> ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1.1 i <value>
Start monitoring Eltex MES-series Ethernet switch (custom 802.1Q EtherType/QinQ) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ELTEX-MES-IF-EXTENSION-MIB::eltIfDot1qCustomIngressEtherType1 OID value, configure state conditions and alerts, and monitor any Eltex MES-series Ethernet switch (custom 802.1Q EtherType/QinQ) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.35265 | eltexLtd | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1 | elHardware | ELTEX-SMI-ACTUAL |
| 1.3.6.1.4.1.35265.1.23 | eltMes | ELTEX-MES |
| 1.3.6.1.4.1.35265.1.23.1 | eltMesMng | ELTEX-MES |
| 1.3.6.1.4.1.35265.1.23.1.276 | eltMesIfExtensionMIB | ELTEX-MES-MNG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.35265.1.23.1.276.1 | eltMesIfExtensionMIBObjects | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3 | eltMesIfExtDot1qCustomEtherType | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3.2 | eltIfDot1qCustomIngressEtherTypeTable | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1 | eltIfDot1qCustomIngressEtherTypeEntry | ELTEX-MES-IF-EXTENSION-MIB |
| 1.3.6.1.4.1.35265.1.23.1.276.1.3.2.1.1 | eltIfDot1qCustomIngressEtherType1 | ELTEX-MES-IF-EXTENSION-MIB |