EFM-CU-MIB :: efmCuPmeSubTypesSupported

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsEFM-CU-MIBefmCuPmeSubTypesSupported

efmCuPmeSubTypesSupported

Module: EFM-CU-MIB

OID (symbolic): EFM-CU-MIB::efmCuPmeSubTypesSupported

OID (numeric): 1.3.6.1.2.1.167.1.2.2.1.1

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: PME supported subtypes. This is a bitmap of possible subtypes. The various bit positions are: ieee2BaseTLO - PME is capable of operating as 2BaseTL-O ieee2BaseTLR - PME is capable of operating as 2BaseTL-R ieee10PassTSO - PME is capable of operating as 10PassTS-O ieee10PassTSR - PME is capable of operating as 10PassTS-R

The desired mode of operation is determined by efmCuPmeAdminSubType, while efmCuPmeOperSubType reflects the current operating mode.

If a Clause 45 MDIO Interface to the PCS is present, then this object combines the 10PASS-TS capable and 2BASE-TL capable bits in the 10P/2B PMA/PMD speed ability register and the CO supported and CPE supported bits in the 10P/2B PMA/PMD status register.

What is efmCuPmeSubTypesSupported?

This read-only bitmap reports which EFM copper subtypes (2BaseTL-O, 2BaseTL-R, 10PassTS-O, 10PassTS-R) this PME's hardware is capable of operating as. Compare it against efmCuPmeAdminSubType before configuring a mode, since attempts to set an unsupported subtype are rejected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.167.1.2.2.1.1
snmpwalk -v2c -c public <target> EFM-CU-MIB::efmCuPmeSubTypesSupported

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.167.1.2.2.1.1.1
snmpget -v2c -c public <target> EFM-CU-MIB::efmCuPmeSubTypesSupported.1

Start monitoring DSLAM/EFM access multiplexer or CPE (802.3ah EFM Copper, vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EFM-CU-MIB::efmCuPmeSubTypesSupported OID value, configure state conditions and alerts, and monitor any DSLAM/EFM access multiplexer or CPE (802.3ah EFM Copper, vendor-neutral IETF standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.167efmCuMIBEFM-CU-MIB
1.3.6.1.2.1.167.1efmCuObjectsEFM-CU-MIB
1.3.6.1.2.1.167.1.2efmCuPmeEFM-CU-MIB
1.3.6.1.2.1.167.1.2.2efmCuPmeCapabilityTableEFM-CU-MIB
1.3.6.1.2.1.167.1.2.2.1efmCuPmeCapabilityEntryEFM-CU-MIB
1.3.6.1.2.1.167.1.2.2.1.1efmCuPmeSubTypesSupportedEFM-CU-MIB