All MIBs › EFM-CU-MIB › efmCuPmeOperStatus
efmCuPmeOperStatus
Module: EFM-CU-MIB
OID (symbolic): EFM-CU-MIB::efmCuPmeOperStatus
OID (numeric): 1.3.6.1.2.1.167.1.2.3.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current PME link Operational Status. Possible values are: up(1) - The link is Up and ready to pass 64/65-octet encoded frames or fragments. downNotReady(2) - The link is Down and the PME does not detect Handshake tones from its peer. This value may indicate a possible problem with the peer PME. downReady(3) - The link is Down and the PME detects Handshake tones from its peer. init(4) - The link is Initializing, as a result of ifAdminStatus being set to 'up' for a particular PME or a PCS to which the PME is connected.
This object is intended to supplement the Down(2) state of ifOperStatus.
This object partially maps to the Clause 30 attribute aPMEStatus.
If a Clause 45 MDIO Interface to the PME is present, then this object partially maps to PMA/PMD link status bits in 10P/2B PMA/PMD status register.
What is efmCuPmeOperStatus?
This read-only value reports the actual current state of an individual PME link: up (passing frames), downNotReady (no handshake tones detected from the peer, suggesting a peer problem), downReady (handshake tones detected but not yet linked), or init (currently initializing). It supplements the coarser Down(2) value of ifOperStatus with more detail specific to copper-pair bonding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.167.1.2.3.1.1 snmpwalk -v2c -c public <target> EFM-CU-MIB::efmCuPmeOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.167.1.2.3.1.1.1 snmpget -v2c -c public <target> EFM-CU-MIB::efmCuPmeOperStatus.1
Start monitoring DSLAM/EFM access multiplexer or CPE (802.3ah EFM Copper, vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EFM-CU-MIB::efmCuPmeOperStatus OID value, configure state conditions and alerts, and monitor any DSLAM/EFM access multiplexer or CPE (802.3ah EFM Copper, vendor-neutral IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.167 | efmCuMIB | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1 | efmCuObjects | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2 | efmCuPme | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.3 | efmCuPmeStatusTable | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.3.1 | efmCuPmeStatusEntry | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.3.1.1 | efmCuPmeOperStatus | EFM-CU-MIB |