All MIBs › EFM-CU-MIB › efmCuPmeAdminSubType
efmCuPmeAdminSubType
Module: EFM-CU-MIB
OID (symbolic): EFM-CU-MIB::efmCuPmeAdminSubType
OID (numeric): 1.3.6.1.2.1.167.1.2.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Administrative (desired) subtype of the PME. Possible values are: ieee2BaseTLO - PME SHALL operate as 2BaseTL-O ieee2BaseTLR - PME SHALL operate as 2BaseTL-R ieee10PassTSO - PME SHALL operate as 10PassTS-O ieee10PassTSR - PME SHALL operate as 10PassTS-R ieee2BaseTLor10PassTSR - PME SHALL operate as 2BaseTL-R or 10PassTS-R. The actual value will be set by the -O link partner during initialization (handshake). ieee2BaseTLor10PassTSO - PME SHALL operate as 2BaseTL-O (preferred) or 10PassTS-O. The actual value will be set during initialization depending on the -R link partner capability (i.e., if -R is incapable of the preferred 2BaseTL mode, 10PassTS will be used). ieee10PassTSor2BaseTLO - PME SHALL operate as 10PassTS-O
(preferred) or 2BaseTL-O. The actual value will be set during initialization depending on the -R link partner capability (i.e., if -R is incapable of the preferred 10PassTS mode, 2BaseTL will be used).
Changing efmCuPmeAdminSubType is a traffic-disruptive operation and as such SHALL be done when the link is Down. Attempts to change this object SHALL be rejected if the link is Up or Initializing. Attempts to change this object to an unsupported subtype (see efmCuPmeSubTypesSupported) SHALL be rejected.
The current operational subtype is indicated by the efmCuPmeOperSubType variable.
If a Clause 45 MDIO Interface to the PMA/PMD is present, then this object combines values of the Port subtype select bits and the PMA/PMD type selection bits in the 10P/2B PMA/PMD control register.
What is efmCuPmeAdminSubType?
This read-write setting configures which EFM copper mode a specific PME (physical modem/line) should operate in: fixed modes like ieee2BaseTLO/R or ieee10PassTSO/R, or auto-negotiated combinations like ieee2BaseTLor10PassTSO where the actual mode is decided during the O/R handshake. Changing it is traffic-disruptive and must be done with the link down; the actually-negotiated mode shows up in efmCuPmeOperSubType.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.167.1.2.1.1.1 snmpwalk -v2c -c public <target> EFM-CU-MIB::efmCuPmeAdminSubType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.167.1.2.1.1.1.1 snmpget -v2c -c public <target> EFM-CU-MIB::efmCuPmeAdminSubType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.167.1.2.1.1.1.1 i <value>
Start monitoring DSLAM/EFM access multiplexer or CPE (802.3ah EFM Copper, vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EFM-CU-MIB::efmCuPmeAdminSubType OID value, configure state conditions and alerts, and monitor any DSLAM/EFM access multiplexer or CPE (802.3ah EFM Copper, vendor-neutral IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.167 | efmCuMIB | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1 | efmCuObjects | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2 | efmCuPme | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.1 | efmCuPmeConfTable | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.1.1 | efmCuPmeConfEntry | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.1.1.1 | efmCuPmeAdminSubType | EFM-CU-MIB |