All MIBs › EFM-CU-MIB › efmCuPme2BPower
efmCuPme2BPower
Module: EFM-CU-MIB
OID (symbolic): EFM-CU-MIB::efmCuPme2BPower
OID (numeric): 1.3.6.1.2.1.167.1.2.5.2.1.7
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description: Signal Transmit Power. Multiple of 0.5 dBm. The value of 0 in the administrative profile means that the signal transmit power is not fixed and SHALL be set to maximize the attainable rate, under the spectral limitations placed by the efmCuPme2BRegion and efmCuPme2BsMode.
If a Clause 45 MDIO Interface to the PME is present, then this object maps to the Power1 bits in the 2B PMD parameters register.
What is efmCuPme2BPower?
This read-create value, in 0.5 dBm steps, sets the signal transmit power for a 2BASE-TL PME profile; a value of 0 means power isn't fixed and should instead be maximized (subject to region/mode spectral limits) to get the best attainable rate. Admins tune this alongside efmCuPme2BRegion when balancing reach versus crosstalk to neighboring pairs.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.167 | efmCuMIB | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1 | efmCuObjects | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2 | efmCuPme | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.5 | efmCuPme2B | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.5.2 | efmCuPme2BProfileTable | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.5.2.1 | efmCuPme2BProfileEntry | EFM-CU-MIB |
| 1.3.6.1.2.1.167.1.2.5.2.1.7 | efmCuPme2BPower | EFM-CU-MIB |