Dell-POE-MIB :: rlPethPowerPseLegacyDisabled

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › Dell-POE-MIB › rlPethPowerPseLegacyDisabled

rlPethPowerPseLegacyDisabled

Module: Dell-POE-MIB

OID (symbolic): Dell-POE-MIB::rlPethPowerPseLegacyDisabled

OID (numeric): 1.3.6.1.4.1.89.108.3.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable identifies poe Legacy global configuration mode

What is rlPethPowerPseLegacyDisabled?

This object reports the switch's global setting for legacy Power-over-Ethernet device detection, using the unusual convention that enabled(0) means legacy detection is active and disabled(1) means it is turned off. Administrators enable legacy detection support when older, pre-802.3af PoE devices such as certain IP phones or cameras need power but do not respond to the standard PoE handshake, and disable it to avoid falsely powering up non-PoE equipment. Setting it to disabled(1) would stop the switch from attempting legacy power negotiation with connected devices.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.108.3.1.8
snmpwalk -v2c -c public <target> Dell-POE-MIB::rlPethPowerPseLegacyDisabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.89.108.3.1.8.1
snmpget -v2c -c public <target> Dell-POE-MIB::rlPethPowerPseLegacyDisabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.89.108.3.1.8.1 i <value>

Start monitoring Dell PowerConnect/Networking managed switch (PoE ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Dell-POE-MIB::rlPethPowerPseLegacyDisabled OID value, configure state conditions and alerts, and monitor any Dell PowerConnect/Networking managed switch (PoE ports) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.89rndDell-MIB
1.3.6.1.4.1.89.108rlPoeDell-MIB
Numeric OIDNameModule
1.3.6.1.4.1.89.108.3rlPethPowerPseTableDell-POE-MIB
1.3.6.1.4.1.89.108.3.1rlPethPowerPseEntryDell-POE-MIB
1.3.6.1.4.1.89.108.3.1.8rlPethPowerPseLegacyDisabledDell-POE-MIB