All MIBs › Dell-LAN-TRAP-MIB › dellTrapSeverity
dellTrapSeverity
Module: Dell-LAN-TRAP-MIB
OID (symbolic): Dell-LAN-TRAP-MIB::dellTrapSeverity
OID (numeric): 1.3.6.1.4.1.674.10895.5000.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The severity type of the enterprise-specific trap sent to the Network Management Station by the Dell managed device. The Severity level are defined as follows: Critical - service affecting event. Major - a major error which is not service affecting but does require immediate user attention to prevent further degredation of the system, which may lead to a critical error. For example, if a redundant port failure would be considered a major event whereas the failure of an unprotected port is a critical event. Minor - a minor event which is not service affecting and is unlikely to lead to a major or critical event. The user does not need to take immediate actions but some action is required to clear the event. Info - a notification to the user of some event that does not require any user action. For example, a security notification is useful information but does not require the user to take any specific immediate action. This event is not cleared. Clear - this special trap is sent to clear some previously sent trap. Note that if the sequence number sent with the clear event is 0 then the clear event is used to indicate that all outstanding event of this particular type on a given source (dellTrapSource) has been cleared. If the event sequence number (dellTrapSeqNum) is sent with a non-zero value, then the clear event is sent to clear only the specific trap instance designated by the sequence number in question.
What is dellTrapSeverity?
This value indicates how serious the condition reported by a Dell device's trap is, ranging from a routine informational notice up through a critical, service-affecting event, with a special clear level used to cancel a previously reported condition. An admin uses this to triage incoming traps, responding immediately to critical(4) events while informational ones can simply be logged. For example, a trap arriving with severity major(3) signals a serious issue needing prompt attention to prevent it escalating into a critical, service-affecting failure, while a matching later trap with severity clear(0) would indicate that same condition has resolved.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.1.1.2 snmpwalk -v2c -c public <target> Dell-LAN-TRAP-MIB::dellTrapSeverity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.1.1.2.1 snmpget -v2c -c public <target> Dell-LAN-TRAP-MIB::dellTrapSeverity.1
Start monitoring Dell PowerConnect/Networking managed switch (common trap/notification structure) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Dell-LAN-TRAP-MIB::dellTrapSeverity OID value, configure state conditions and alerts, and monitor any Dell PowerConnect/Networking managed switch (common trap/notification structure) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.1 | dellLanCommon | Dell-Vendor-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.1.1 | dellAlarmGroup | Dell-LAN-TRAP-MIB |
| 1.3.6.1.4.1.674.10895.5000.1.1.2 | dellTrapSeverity | Dell-LAN-TRAP-MIB |