Dell-LAN-SYSMNG-MIB :: dellLanFileActionDestFile

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › Dell-LAN-SYSMNG-MIB › dellLanFileActionDestFile

dellLanFileActionDestFile

Module: Dell-LAN-SYSMNG-MIB

OID (symbolic): Dell-LAN-SYSMNG-MIB::dellLanFileActionDestFile

OID (numeric): 1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The destination file may be specified using a URL addressing scheme. The format of this address are as follows: - flash://filename => indicate a file on the flash file system. - filename => indicates a file on the flash file system. - tftp://IPaddr/filename => indicates a file on a remote tftp server at the host given by 'IPaddr'. The filename in this case may be specified with a full path. - startup-config => a special file name indicating the startup configuration. NOTE that this file CANNOT be renamed. - running-config => a special file name indicating the running configuration. NOTE that this file CANNOT be renamed or deleted.

Note that 'image' (which is the active software image is not valid as a destination.

What is dellLanFileActionDestFile?

The destination file for a copy or rename action, specified the same way as the source file; note that 'image' (the active firmware) is not a valid destination for this object.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.3
snmpwalk -v2c -c public <target> Dell-LAN-SYSMNG-MIB::dellLanFileActionDestFile

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.3.1
snmpget -v2c -c public <target> Dell-LAN-SYSMNG-MIB::dellLanFileActionDestFile.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.3.1 s <value>

Start monitoring Dell Networking (PowerConnect/N-series/S-series) switch (system management: access control/file system) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Dell-LAN-SYSMNG-MIB::dellLanFileActionDestFile OID value, configure state conditions and alerts, and monitor any Dell Networking (PowerConnect/N-series/S-series) switch (system management: access control/file system) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.1dellLanCommonDell-Vendor-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.1.2dellLanSystemMngDell-LAN-SYSMNG-MIB
1.3.6.1.4.1.674.10895.5000.1.2.2dellLanFileSysGroupDell-LAN-SYSMNG-MIB
1.3.6.1.4.1.674.10895.5000.1.2.2.4dellLanFileActionTableDell-LAN-SYSMNG-MIB
1.3.6.1.4.1.674.10895.5000.1.2.2.4.1dellLanFileActionEntryDell-LAN-SYSMNG-MIB
1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.3dellLanFileActionDestFileDell-LAN-SYSMNG-MIB