All MIBs › DS8200v2-MIB › serialDteStopBit
serialDteStopBit
Module: DS8200v2-MIB
OID (symbolic): DS8200v2-MIB::serialDteStopBit
OID (numeric): 1.3.6.1.4.1.321.100.2.5.1.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This variable describes the stop bit setting for the DTE interface. This variable is only valid when the DTE interface is set to ASYNC. The values mean: serialDteStopBit1 The DTE interface is configured to operate in the ASYNC mode with 1 stop bit serialDteStopBit2 The DTE interface is configured to operate in the ASYNC mode with 2 stop bits serialDteStopBitNotAvail The stop bit information is not available. The DTE interface is probably configured for synchronous operation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.321.100.2.5.1.1.10 snmpwalk -v2c -c public <target> DS8200v2-MIB::serialDteStopBit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.321.100.2.5.1.1.10.1 snmpget -v2c -c public <target> DS8200v2-MIB::serialDteStopBit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.321.100.2.5.1.1.10.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.321 | verilink | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100 | hbu | DS8200v2-TC-MIB |
| 1.3.6.1.4.1.321.100.2 | tinterfaces | DS8200v2-MIB |
| 1.3.6.1.4.1.321.100.2.5 | serialDte | DS8200v2-MIB |
| 1.3.6.1.4.1.321.100.2.5.1 | serialDteConfigTable | DS8200v2-MIB |
| 1.3.6.1.4.1.321.100.2.5.1.1 | serialDteConfigTableEntry | DS8200v2-MIB |
| 1.3.6.1.4.1.321.100.2.5.1.1.10 | serialDteStopBit | DS8200v2-MIB |