All MIBs › DPNSS-MIB › dpnssSigL2ReTxnAckTimeout
dpnssSigL2ReTxnAckTimeout
Module: DPNSS-MIB
OID (symbolic): DPNSS-MIB::dpnssSigL2ReTxnAckTimeout
OID (numeric): 1.3.6.1.2.1.10.999.1.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This is the minimum post retransmission acknowledgment delay designated as 'NT2' in BTNR 188. This is the minimum period of time after the expiry of NL and NT1 during which an acknowledgement is awaited before reporting a retransmission failure to DPNSS Layer 3. When DPNSS is used via a satellite link, BTNR 188 recommends a value of 520ms for NT2 and 0 otherwise. If set to a value of -1 (or any other negative value) this parameter is rendered redundant. In such cases the NT2 value should be set/read on a per DLC basis from dpnssDLCTable. If set to a value other than -1 (or any other negative value) it will be applicable to all the DLCs.
What is dpnssSigL2ReTxnAckTimeout?
Sets the BTNR 188 'NT2' minimum post-retransmission acknowledgment delay, in milliseconds, before a retransmission failure is reported up to DPNSS Layer 3; BTNR recommends 520ms over satellite links and 0 otherwise, and a negative value defers to per-DLC settings. An admin raises this on a satellite-routed DPNSS link to accommodate its extra propagation delay before declaring a retransmission failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.999.1.1.8 snmpwalk -v2c -c public <target> DPNSS-MIB::dpnssSigL2ReTxnAckTimeout
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.999.1.1.8.1 snmpget -v2c -c public <target> DPNSS-MIB::dpnssSigL2ReTxnAckTimeout.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.999.1.1.8.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> dpnssSigL2ReTxnAckTimeout.1
Start monitoring Nortel PBX/digital telephony switch (DPNSS signaling interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DPNSS-MIB::dpnssSigL2ReTxnAckTimeout OID value, configure state conditions and alerts, and monitor any Nortel PBX/digital telephony switch (DPNSS signaling interface) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.999 | dpnssMib | DPNSS-MIB |
| 1.3.6.1.2.1.10.999.1 | dpnssSigTable | DPNSS-MIB |
| 1.3.6.1.2.1.10.999.1.1 | dpnssSigEntry | DPNSS-MIB |
| 1.3.6.1.2.1.10.999.1.1.8 | dpnssSigL2ReTxnAckTimeout | DPNSS-MIB |