All MIBs › DPNSS-MIB › dpnssSigEndPtType

dpnssSigEndPtType

OID (symbolic): DPNSS-MIB::dpnssSigEndPtType

OID (numeric): 1.3.6.1.2.1.10.999.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object shall be used such that the two PBXs at each end of the transmission link shall be designated A & B by arrangement at configuration as specified in BTNR 188.

What is dpnssSigEndPtType?

Designates this end of the DPNSS link as PBX 'A' or 'B' per BTNR 188, a designation the two PBXs must agree on at configuration time. An admin sets this consistently with the far-end PBX's configuration so the link's endpoint roles don't conflict.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.999.1.1.5
snmpwalk -v2c -c public <target> DPNSS-MIB::dpnssSigEndPtType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.999.1.1.5.1
snmpget -v2c -c public <target> DPNSS-MIB::dpnssSigEndPtType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.999.1.1.5.1 i <value>

Start monitoring Nortel PBX/digital telephony switch (DPNSS signaling interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DPNSS-MIB::dpnssSigEndPtType OID value, configure state conditions and alerts, and monitor any Nortel PBX/digital telephony switch (DPNSS signaling interface) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.2	mgmt	APERTUS-NPG-MIB
1.3.6.1.2.1	mib_2	AXON-MIB
1.3.6.1.2.1.10	transmission	CHECKPOINT-MIB-2

Numeric OID	Name	Module
1.3.6.1.2.1.10.999	dpnssMib	DPNSS-MIB
1.3.6.1.2.1.10.999.1	dpnssSigTable	DPNSS-MIB
1.3.6.1.2.1.10.999.1.1	dpnssSigEntry	DPNSS-MIB
1.3.6.1.2.1.10.999.1.1.5	dpnssSigEndPtType	DPNSS-MIB

DPNSS-MIB :: dpnssSigEndPtType

dpnssSigEndPtType

Module

This MIB depends on