DPNSS-MIB :: dpnssDLCReTxnAckTimeout

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DPNSS-MIB › dpnssDLCReTxnAckTimeout

dpnssDLCReTxnAckTimeout

Module: DPNSS-MIB

OID (symbolic): DPNSS-MIB::dpnssDLCReTxnAckTimeout

OID (numeric): 1.3.6.1.2.1.10.999.2.1.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This is the minimum post retransmission acknowledgment delay designated as 'NT2' in BTNR 188. This is the minimum period of time after the expiry of NL and NT1 during which an acknowledgement is awaited before reporting a retransmission failure to DPNSS Layer 3. When DPNSS is used via a satellite link, BTNR 188 recommends a value of 520ms for NT2 and 0 otherwise. If set to a value of -1 (or any other negative value) this parameter is rendered redundant. In such cases the NT2 value should be set/read from dpnssSigTable. This value should not be -1 in the dpnssSigTable and dpnssDLCTable at the same time.

What is dpnssDLCReTxnAckTimeout?

Sets the BTNR 188 'NT2' minimum post-retransmission acknowledgment delay, in milliseconds, for this specific DLC; a negative value defers to the channel-wide dpnssSigTable setting, and the two should not both be -1. An admin tunes this per DLC when only one DLC on the channel runs over a higher-latency path, such as a satellite hop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.999.2.1.6
snmpwalk -v2c -c public <target> DPNSS-MIB::dpnssDLCReTxnAckTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.999.2.1.6.1
snmpget -v2c -c public <target> DPNSS-MIB::dpnssDLCReTxnAckTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.999.2.1.6.1 i <value>

Start monitoring Nortel PBX/digital telephony switch (DPNSS signaling interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DPNSS-MIB::dpnssDLCReTxnAckTimeout OID value, configure state conditions and alerts, and monitor any Nortel PBX/digital telephony switch (DPNSS signaling interface) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.999dpnssMibDPNSS-MIB
1.3.6.1.2.1.10.999.2dpnssDLCTableDPNSS-MIB
1.3.6.1.2.1.10.999.2.1dpnssDLCEntryDPNSS-MIB
1.3.6.1.2.1.10.999.2.1.6dpnssDLCReTxnAckTimeoutDPNSS-MIB