DOT3-OAM-MIB :: dot3OamPeerMacAddress

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOT3-OAM-MIBdot3OamPeerMacAddress

dot3OamPeerMacAddress

Module: DOT3-OAM-MIB

OID (symbolic): DOT3-OAM-MIB::dot3OamPeerMacAddress

OID (numeric): 1.3.6.1.2.1.158.1.2.1.1

Node type: OBJECT-TYPE

Type: MacAddress

Access: read-only

Description: The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU.

What is dot3OamPeerMacAddress?

This read-only value holds the MAC address of the remote OAM peer, learned from the most recently received OAMPDU. An admin uses it to identify which specific device is at the other end of an Ethernet OAM session, e.g. matching it against the peer's known interface MAC during a link audit.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.158.1.2.1.1
snmpwalk -v2c -c public <target> DOT3-OAM-MIB::dot3OamPeerMacAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.158.1.2.1.1.1
snmpget -v2c -c public <target> DOT3-OAM-MIB::dot3OamPeerMacAddress.1

Start monitoring Ethernet switch/access device supporting IEEE 802.3ah OAM (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT3-OAM-MIB::dot3OamPeerMacAddress OID value, configure state conditions and alerts, and monitor any Ethernet switch/access device supporting IEEE 802.3ah OAM (vendor-neutral IETF standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.158dot3OamMIBDOT3-OAM-MIB
1.3.6.1.2.1.158.1dot3OamObjectsDOT3-OAM-MIB
1.3.6.1.2.1.158.1.2dot3OamPeerTableDOT3-OAM-MIB
1.3.6.1.2.1.158.1.2.1dot3OamPeerEntryDOT3-OAM-MIB
1.3.6.1.2.1.158.1.2.1.1dot3OamPeerMacAddressDOT3-OAM-MIB