DOT1X-ADVANCED-FEATURES-MIB :: agentDot1xClientSessionTimeout

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DOT1X-ADVANCED-FEATURES-MIB › agentDot1xClientSessionTimeout

agentDot1xClientSessionTimeout

Module: DOT1X-ADVANCED-FEATURES-MIB

OID (symbolic): DOT1X-ADVANCED-FEATURES-MIB::agentDot1xClientSessionTimeout

OID (numeric): 1.3.6.1.4.1.7244.2.36.3.1.1.8

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Specifies the Guest Vlan of the interface. An interface will be moved to its Guest Vlan if its access is unsucessfully authenticated. A value of zero indicates no Guest Vlan configured for the interface.

What is agentDot1xClientSessionTimeout?

This read-only value, part of the per-client agentDot1xClientEntry table, is the session timeout, in seconds, that applies to this authenticated 802.1x client's session. An admin cares because it shows the interval after which the client's session is set to expire or require reauthentication, letting the admin confirm the client is following an appropriate timeout policy whether inherited from RADIUS or the port default. As an illustrative example, a value of 3600 would mean this client's session is set to time out after one hour.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7244.2.36.3.1.1.8
snmpwalk -v2c -c public <target> DOT1X-ADVANCED-FEATURES-MIB::agentDot1xClientSessionTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7244.2.36.3.1.1.8.1
snmpget -v2c -c public <target> DOT1X-ADVANCED-FEATURES-MIB::agentDot1xClientSessionTimeout.1

Start monitoring Quanta enterprise switch (802.1X advanced features: guest VLAN/MAB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT1X-ADVANCED-FEATURES-MIB::agentDot1xClientSessionTimeout OID value, configure state conditions and alerts, and monitor any Quanta enterprise switch (802.1X advanced features: guest VLAN/MAB) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7244quantaQUANTA-SWITCH-MIB
1.3.6.1.4.1.7244.2switchQUANTA-SWITCH-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7244.2.36dot1xAdvancedDOT1X-ADVANCED-FEATURES-MIB
1.3.6.1.4.1.7244.2.36.3agentDot1xClientGroupDOT1X-ADVANCED-FEATURES-MIB
1.3.6.1.4.1.7244.2.36.3.1agentDot1xClientTableDOT1X-ADVANCED-FEATURES-MIB
1.3.6.1.4.1.7244.2.36.3.1.1agentDot1xClientEntryDOT1X-ADVANCED-FEATURES-MIB
1.3.6.1.4.1.7244.2.36.3.1.1.8agentDot1xClientSessionTimeoutDOT1X-ADVANCED-FEATURES-MIB