All MIBs › DOT12-RPTR-MIB › vgRptrPortPriorityEnable
vgRptrPortPriorityEnable
Module: DOT12-RPTR-MIB
OID (symbolic): DOT12-RPTR-MIB::vgRptrPortPriorityEnable
OID (numeric): 1.3.6.1.2.1.53.1.1.3.1.1.10
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: A configuration flag used to determine whether the repeater will service high priority requests received on the port as high priority or normal priority. When 'false', high priority requests
on this port will be serviced as normal priority.
The setting of this object has no effect on a cascade port. Also note that the setting of this object has no effect on a port connected to a cascaded repeater. In both of these cases, this setting is treated as always 'true'. The value 'false' only has an effect when the port is a localInternal or localExternal port connected to an end node.
The value of this object should be preserved across repeater resets and power failures.
What is vgRptrPortPriorityEnable?
A configuration flag controlling whether high-priority requests received on this local port are honored as high priority (true) or downgraded to normal priority (false); it has no effect on cascade ports. An admin might set this false on an end-node port to prevent that device from monopolizing bandwidth with high-priority traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.53.1.1.3.1.1.10 snmpwalk -v2c -c public <target> DOT12-RPTR-MIB::vgRptrPortPriorityEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.53.1.1.3.1.1.10.1 snmpget -v2c -c public <target> DOT12-RPTR-MIB::vgRptrPortPriorityEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.53.1.1.3.1.1.10.1 s <value>
Start monitoring IEEE 802.12 100VG-AnyLAN repeater/hub (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-RPTR-MIB::vgRptrPortPriorityEnable OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN repeater/hub (vendor-neutral IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.53 | vgRptrMIB | DOT12-RPTR-MIB |
| 1.3.6.1.2.1.53.1 | vgRptrObjects | DOT12-RPTR-MIB |
| 1.3.6.1.2.1.53.1.1 | vgRptrBasic | DOT12-RPTR-MIB |
| 1.3.6.1.2.1.53.1.1.3 | vgRptrBasicPort | DOT12-RPTR-MIB |
| 1.3.6.1.2.1.53.1.1.3.1 | vgRptrBasicPortTable | DOT12-RPTR-MIB |
| 1.3.6.1.2.1.53.1.1.3.1.1 | vgRptrBasicPortEntry | DOT12-RPTR-MIB |
| 1.3.6.1.2.1.53.1.1.3.1.1.10 | vgRptrPortPriorityEnable | DOT12-RPTR-MIB |