DOT12-RPTR-MIB :: vgRptrPortIPMFrames

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOT12-RPTR-MIBvgRptrPortIPMFrames

vgRptrPortIPMFrames

Module: DOT12-RPTR-MIB

OID (symbolic): DOT12-RPTR-MIB::vgRptrPortIPMFrames

OID (numeric): 1.3.6.1.2.1.53.1.2.3.1.1.19

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object is a count of the number of frames that have been received on this port with an invalid packet marker and no PMI errors. A repeater will write an invalid packet marker to the end of a frame containing errors as it is

forwarded through the repeater to the other ports. This counter is incremented by one for each frame received on this port which has had an invalid packet marker added to the end of the frame.

This counter indicates problems occurring in the domain of other repeaters, as opposed to problems with cables or devices directly attached to this repeater.

This counter may experience a discontinuity when the value of the corresponding instance of vgRptrPortLastChange changes.

What is vgRptrPortIPMFrames?

Counts frames received on this port that carry an invalid packet marker (IPM) added by an upstream repeater, without any other PMI errors. An admin uses a high count here to localize a fault to another repeater further up the cascade rather than to cabling or a device directly attached to this port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.53.1.2.3.1.1.19
snmpwalk -v2c -c public <target> DOT12-RPTR-MIB::vgRptrPortIPMFrames

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.53.1.2.3.1.1.19.1
snmpget -v2c -c public <target> DOT12-RPTR-MIB::vgRptrPortIPMFrames.1

Start monitoring IEEE 802.12 100VG-AnyLAN repeater/hub (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-RPTR-MIB::vgRptrPortIPMFrames OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN repeater/hub (vendor-neutral IETF standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.53vgRptrMIBDOT12-RPTR-MIB
1.3.6.1.2.1.53.1vgRptrObjectsDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2vgRptrMonitorDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.3vgRptrMonPortDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.3.1vgRptrMonPortTableDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.3.1.1vgRptrMonPortEntryDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.3.1.1.19vgRptrPortIPMFramesDOT12-RPTR-MIB