DOT12-RPTR-MIB :: vgRptrMonHCTotalReadableOctets

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDOT12-RPTR-MIBvgRptrMonHCTotalReadableOctets

vgRptrMonHCTotalReadableOctets

Module: DOT12-RPTR-MIB

OID (symbolic): DOT12-RPTR-MIB::vgRptrMonHCTotalReadableOctets

OID (numeric): 1.3.6.1.2.1.53.1.2.1.1.1.4

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of octets contained in good frames that have been received on all ports in this repeater. If an implementation cannot obtain a count of octets as seen by the repeater itself, this counter may be implemented as the summation of the values of the vgRptrPortHCReadableOctets counters for all of the ports in this repeater.

This counter is a 64 bit version of vgRptrMonTotalReadableOctets. It should be used by Network Management protocols which support 64 bit counters (e.g. SNMPv2).

This counter may experience a discontinuity when the value of the corresponding instance of vgRptrInfoLastChange changes.

What is vgRptrMonHCTotalReadableOctets?

The 64-bit ('high capacity') version of vgRptrMonTotalReadableOctets, giving a running total of octets in good frames received across all ports of this repeater without needing a separate rollover counter. An admin using an SNMPv2/v3 manager should prefer this single 64-bit counter over polling the two 32-bit octet/rollover objects together.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.53.1.2.1.1.1.4
snmpwalk -v2c -c public <target> DOT12-RPTR-MIB::vgRptrMonHCTotalReadableOctets

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.53.1.2.1.1.1.4.1
snmpget -v2c -c public <target> DOT12-RPTR-MIB::vgRptrMonHCTotalReadableOctets.1

Start monitoring IEEE 802.12 100VG-AnyLAN repeater/hub (vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-RPTR-MIB::vgRptrMonHCTotalReadableOctets OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN repeater/hub (vendor-neutral IETF standard) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.53vgRptrMIBDOT12-RPTR-MIB
1.3.6.1.2.1.53.1vgRptrObjectsDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2vgRptrMonitorDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.1vgRptrMonRepeaterDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.1.1vgRptrMonitorTableDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.1.1.1vgRptrMonitorEntryDOT12-RPTR-MIB
1.3.6.1.2.1.53.1.2.1.1.1.4vgRptrMonHCTotalReadableOctetsDOT12-RPTR-MIB