All MIBs › DOT12-IF-MIB › dot12OutHighPriorityOctets
dot12OutHighPriorityOctets
Module: DOT12-IF-MIB
OID (symbolic): DOT12-IF-MIB::dot12OutHighPriorityOctets
OID (numeric): 1.3.6.1.2.1.10.45.1.2.1.10
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: This counter is incremented by OctetCount for each frame counted by dot12OutHighPriorityFrames.
Note that this counter will roll over very quickly. It is provided for backward compatibility for Network Management protocols that do not support 64 bit counters (e.g. SNMP version 1).
What is dot12OutHighPriorityOctets?
Counts the total octets in high-priority frames transmitted out this interface, incrementing alongside dot12OutHighPriorityFrames; being a 32-bit counter it can roll over quickly on a busy link, so the 64-bit dot12HCOutHighPriorityOctets should be preferred where supported.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.45.1.2.1.10 snmpwalk -v2c -c public <target> DOT12-IF-MIB::dot12OutHighPriorityOctets
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.45.1.2.1.10.1 snmpget -v2c -c public <target> DOT12-IF-MIB::dot12OutHighPriorityOctets.1
Start monitoring IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-IF-MIB::dot12OutHighPriorityOctets OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.45 | dot12MIB | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1 | dot12MIBObjects | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.2 | dot12StatTable | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.2.1 | dot12StatEntry | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.2.1.10 | dot12OutHighPriorityOctets | DOT12-IF-MIB |