DOT12-IF-MIB :: dot12InDataErrors

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOT12-IF-MIB › dot12InDataErrors

dot12InDataErrors

Module: DOT12-IF-MIB

OID (symbolic): DOT12-IF-MIB::dot12InDataErrors

OID (numeric): 1.3.6.1.2.1.10.45.1.2.1.7

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object is a count of errored frames received on this interface. This counter is incremented by one for each frame received on this interface with any of the following errors: bad FCS (with no IPM), PMI errors (excluding frames with an IPM as the only PMI error), undersize, bad start of frame delimiter, or bad end of packet marker. Does not include frames counted by dot12InIPMErrors, dot12InNullAddressedFrames, or dot12InOversizeFrameErrors.

This counter indicates problems with the cable directly attached to this interface, while dot12InIPMErrors indicates problems with remote cables.

What is dot12InDataErrors?

Counts frames received on this interface with a bad FCS, PMI errors, undersize length, or bad start/end-of-frame delimiters, excluding frames already counted by dot12InIPMErrors, dot12InNullAddressedFrames, or dot12InOversizeFrameErrors; unlike dot12InIPMErrors, a rising count here points to a problem with the cable directly attached to this interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.45.1.2.1.7
snmpwalk -v2c -c public <target> DOT12-IF-MIB::dot12InDataErrors

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.45.1.2.1.7.1
snmpget -v2c -c public <target> DOT12-IF-MIB::dot12InDataErrors.1

Start monitoring IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-IF-MIB::dot12InDataErrors OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.45dot12MIBDOT12-IF-MIB
1.3.6.1.2.1.10.45.1dot12MIBObjectsDOT12-IF-MIB
1.3.6.1.2.1.10.45.1.2dot12StatTableDOT12-IF-MIB
1.3.6.1.2.1.10.45.1.2.1dot12StatEntryDOT12-IF-MIB
1.3.6.1.2.1.10.45.1.2.1.7dot12InDataErrorsDOT12-IF-MIB