DOT12-IF-MIB :: dot12DesiredPromiscStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DOT12-IF-MIB › dot12DesiredPromiscStatus

dot12DesiredPromiscStatus

Module: DOT12-IF-MIB

OID (symbolic): DOT12-IF-MIB::dot12DesiredPromiscStatus

OID (numeric): 1.3.6.1.2.1.10.45.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to select the promiscuous mode that this interface will request in the next training packet issued on this interface. Whether the repeater grants the requested mode must be verified by examining the state of the PP bits in the corresponding instance of dot12LastTrainingConfig.

In master mode, this object controls whether or not promiscuous mode will be granted by the interface when requested by the lower level device.

Note that this object indicates the desired mode for the next time the interface trains. The currently active mode will be reflected in dot12LastTrainingConfig and in ifPromiscuousMode.

What is dot12DesiredPromiscStatus?

Selects whether this 100VG-AnyLAN interface will request single-address or promiscuous mode the next time it trains; the mode actually granted must be confirmed by checking the PP bits in dot12LastTrainingConfig, since the repeater may not grant what was requested.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.45.1.1.1.4
snmpwalk -v2c -c public <target> DOT12-IF-MIB::dot12DesiredPromiscStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.45.1.1.1.4.1
snmpget -v2c -c public <target> DOT12-IF-MIB::dot12DesiredPromiscStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.45.1.1.1.4.1 i <value>

Start monitoring IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-IF-MIB::dot12DesiredPromiscStatus OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.45dot12MIBDOT12-IF-MIB
1.3.6.1.2.1.10.45.1dot12MIBObjectsDOT12-IF-MIB
1.3.6.1.2.1.10.45.1.1dot12ConfigTableDOT12-IF-MIB
1.3.6.1.2.1.10.45.1.1.1dot12ConfigEntryDOT12-IF-MIB
1.3.6.1.2.1.10.45.1.1.1.4dot12DesiredPromiscStatusDOT12-IF-MIB