All MIBs › DOT12-IF-MIB › dot12ControlMode
dot12ControlMode
Module: DOT12-IF-MIB
OID (symbolic): DOT12-IF-MIB::dot12ControlMode
OID (numeric): 1.3.6.1.2.1.10.45.1.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure and report whether or not this interface is operating in master mode. In a Demand Priority network, end node interfaces typically operate in slave mode, while switch interfaces may control the Demand Priority protocol and operate in master mode.
This object may be implemented as a read-only object by those agents and interfaces that do not implement software control of master mode. In particular, interfaces that cannot operate in master mode, and interfaces on which master mode is controlled by a pushbutton on the device, should implement this object read-only.
Some interfaces do not require network management configuration of this feature and can autosense whether to use master mode or slave mode. The value 'learn' is used for that purpose. While autosense is taking place, the value 'learn' is returned.
A network management operation which modifies the value of dot12ControlMode causes the interface to retrain.
What is dot12ControlMode?
Configures or reports whether this 100VG-AnyLAN interface operates as masterMode (typically a hub/switch port controlling the Demand Priority protocol), slaveMode (typically an end-node port), or learn (autosensing which role to take); changing this value forces the interface to retrain.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.45.1.1.1.9 snmpwalk -v2c -c public <target> DOT12-IF-MIB::dot12ControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.45.1.1.1.9.1 snmpget -v2c -c public <target> DOT12-IF-MIB::dot12ControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.45.1.1.1.9.1 i <value>
Start monitoring IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-IF-MIB::dot12ControlMode OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.45 | dot12MIB | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1 | dot12MIBObjects | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.1 | dot12ConfigTable | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.1.1 | dot12ConfigEntry | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.1.1.9 | dot12ControlMode | DOT12-IF-MIB |