All MIBs › DOT12-IF-MIB › dot12Commands
dot12Commands
Module: DOT12-IF-MIB
OID (symbolic): DOT12-IF-MIB::dot12Commands
OID (numeric): 1.3.6.1.2.1.10.45.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If the current value of dot12Status is 'closed', setting the value of this object to 'open' will change the corresponding instance of MIB-II's ifAdminStatus to 'up', cause this interface to enter the 'opening' state, and will cause training to be initiated on this interface. The progress and success of the open is given by the values of the dot12Status object. Setting this object to 'open' when dot12Status has a value other than 'closed' has no effect.
Setting the corresponding instance of ifAdminStatus to 'up' when the current value of dot12Status is 'closed' will have the same effect as setting this object to 'open'. Setting ifAdminStatus to 'up' when dot12Status has a value other than 'closed' has no effect.
Setting the value of this object to 'close' will move this interface into the 'closed' state and cause all transmit and receive actions to stop. This object will then have to be set to 'open' in order to reinitiate training.
Setting the corresponding instance of ifAdminStatus to 'down' will have the same effect as setting this object to 'close'.
Setting the value of this object to 'reset' when the current value of dot12Status has a value other than 'closed' will reset the interface. On a reset, all MIB counters should retain their values.
This will cause the MAC to initiate an acInitializeMAC action as specified in IEEE 802.12. This will cause training to be reinitiated on this interface. Setting this object to 'reset' when dot12Status has a value of 'closed' has no effect. Setting this object to 'reset' has no effect on the corresponding instance of ifAdminStatus.
Setting the value of this object to 'noOp' has no effect.
When read, this object will always have a value of 'noOp'.
What is dot12Commands?
A write-only action object used to control this 100VG-AnyLAN interface's training state: setting it to open initiates training from the closed state, close halts all transmit/receive and forces the interface closed, and reset restarts training without resetting the interface's MIB counters; reads always return noOp regardless of the last action taken.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.45.1.1.1.7 snmpwalk -v2c -c public <target> DOT12-IF-MIB::dot12Commands
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.45.1.1.1.7.1 snmpget -v2c -c public <target> DOT12-IF-MIB::dot12Commands.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.45.1.1.1.7.1 i <value>
Start monitoring IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOT12-IF-MIB::dot12Commands OID value, configure state conditions and alerts, and monitor any IEEE 802.12 100VG-AnyLAN network interface (vendor-neutral IETF standard RFC 2020) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.45 | dot12MIB | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1 | dot12MIBObjects | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.1 | dot12ConfigTable | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.1.1 | dot12ConfigEntry | DOT12-IF-MIB |
| 1.3.6.1.2.1.10.45.1.1.1.7 | dot12Commands | DOT12-IF-MIB |