All MIBs › DOCS-TEST-MIB › docsTestType
docsTestType
Module: DOCS-TEST-MIB
OID (symbolic): DOCS-TEST-MIB::docsTestType
OID (numeric): 1.3.6.1.4.1.4491.2.1.12.1.2.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Corresponds to the TYPE field from the CM/CMTS TLV Table in [17]. The default value of zero indicates no test has yet been initiated. A WrongValueError should be returned in response to a write request for a test not supported by the device. A read request will return the docsTestType value last successfully written, whether that test is active or inactive.
What is docsTestType?
This value selects which specific diagnostic test the admin wants the DOCSIS device to run, corresponding to a TYPE code defined in the DOCSIS CM/CMTS TLV specification, with zero meaning no test has been requested yet. An admin sets this to the code for the desired test before enabling it via docsTestEnable, and an unsupported test type will be rejected by the device. For example, setting this to a specific test type code and then enabling the test would kick off that particular diagnostic on the cable modem or CMTS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.12.1.2.1 snmpwalk -v2c -c public <target> DOCS-TEST-MIB::docsTestType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.12.1.2.1.1 snmpget -v2c -c public <target> DOCS-TEST-MIB::docsTestType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.12.1.2.1.1 i <value>
Start monitoring DOCSIS 2.0 cable modem/CMTS (built-in diagnostic tests, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-TEST-MIB::docsTestType OID value, configure state conditions and alerts, and monitor any DOCSIS 2.0 cable modem/CMTS (built-in diagnostic tests, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.12 | docsTestMIB | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.12.1 | docsTestMibObjects | DOCS-TEST-MIB |
| 1.3.6.1.4.1.4491.2.1.12.1.2 | docsTestSetupObjects | DOCS-TEST-MIB |
| 1.3.6.1.4.1.4491.2.1.12.1.2.1 | docsTestType | DOCS-TEST-MIB |