All MIBs › DOCS-TEST-MIB › docsTestEnable
docsTestEnable
Module: DOCS-TEST-MIB
OID (symbolic): DOCS-TEST-MIB::docsTestEnable
OID (numeric): 1.3.6.1.4.1.4491.2.1.12.1.2.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Used to initiate or stop the tests setup through the docsTestType and docsTestData objects. A CommitFailedError should be returned in response to a TRUE Write request if the values in docsTestType and docsTestData are incompatible, or a test could not be initiated for any other reason.
What is docsTestEnable?
This value is the trigger that actually starts or stops the diagnostic test configured via docsTestType and docsTestData. An admin sets this to true once the test type and any needed parameters are configured, to kick off the diagnostic, and sets it to false to stop a running test. For example, setting this to true after configuring a valid test type would start that diagnostic test, while an incompatible or invalid test configuration would cause the device to reject the request with a commit-failed error instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.12.1.2.3 snmpwalk -v2c -c public <target> DOCS-TEST-MIB::docsTestEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.12.1.2.3.1 snmpget -v2c -c public <target> DOCS-TEST-MIB::docsTestEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.12.1.2.3.1 s <value>
Start monitoring DOCSIS 2.0 cable modem/CMTS (built-in diagnostic tests, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-TEST-MIB::docsTestEnable OID value, configure state conditions and alerts, and monitor any DOCSIS 2.0 cable modem/CMTS (built-in diagnostic tests, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.12 | docsTestMIB | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.12.1 | docsTestMibObjects | DOCS-TEST-MIB |
| 1.3.6.1.4.1.4491.2.1.12.1.2 | docsTestSetupObjects | DOCS-TEST-MIB |
| 1.3.6.1.4.1.4491.2.1.12.1.2.3 | docsTestEnable | DOCS-TEST-MIB |