All MIBs › DOCS-SUBMGT-MIB › docsSubMgtCpeMaxIpDefault
docsSubMgtCpeMaxIpDefault
Module: DOCS-SUBMGT-MIB
OID (symbolic): DOCS-SUBMGT-MIB::docsSubMgtCpeMaxIpDefault
OID (numeric): 1.3.6.1.3.83.4.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The default value for docsSubMgtCpeControlMaxCpeIp if not signaled in the DOCSIS Registration request. Upon initial CMTS initialization, this defaults to 16.
What is docsSubMgtCpeMaxIpDefault?
System-wide default for docsSubMgtCpeControlMaxCpeIp used when a modem's DOCSIS registration doesn't specify its own CPE IP limit; the CMTS initializes this to 16 on first boot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.83.4.1.2 snmpwalk -v2c -c public <target> DOCS-SUBMGT-MIB::docsSubMgtCpeMaxIpDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.83.4.1.2.1 snmpget -v2c -c public <target> DOCS-SUBMGT-MIB::docsSubMgtCpeMaxIpDefault.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.83.4.1.2.1 i <value>
Start monitoring DOCSIS CMTS (subscriber CPE IP control, vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SUBMGT-MIB::docsSubMgtCpeMaxIpDefault OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS (subscriber CPE IP control, vendor-neutral IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.83 | docsDev | EXP-DOCS-CABLE-DEVICE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.83.4 | docsSubMgt | DOCS-SUBMGT-MIB |
| 1.3.6.1.3.83.4.1 | docsSubMgtObjects | DOCS-SUBMGT-MIB |
| 1.3.6.1.3.83.4.1.2 | docsSubMgtCpeMaxIpDefault | DOCS-SUBMGT-MIB |