All MIBs › DOCS-SUBMGT-MIB › docsSubMgtCpeControlMaxCpeIp
docsSubMgtCpeControlMaxCpeIp
Module: DOCS-SUBMGT-MIB
OID (symbolic): DOCS-SUBMGT-MIB::docsSubMgtCpeControlMaxCpeIp
OID (numeric): 1.3.6.1.3.83.4.1.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The number of simultaneous IP addresses permitted behind the CM. If this is set to zero, all CPE traffic from the CM is dropped. If the provisioning object corresponding to docsSubMgtCpeIpTable includes more CPE IP address entries for this modem than the value of this object, then this object is set to the count of the number of rows in docsSubMgtCpeIpTable that have the same docsIfCmtsCmStatusIndex value. (E.g. if the CM has 5 IP addresses specified for it, this value is 5). This limit applies to learned and docsis-provisioned entries, but does not limit entries added through some administrative process at the CMTS. If not set through DOCSIS provisioning, this object defaults to docsSubMgtCpeMaxIpDefault. Note that this object is only meaningful if docsSubMgtCpeControlActive is true.
What is docsSubMgtCpeControlMaxCpeIp?
Caps how many simultaneous CPE IP addresses the CMTS will allow behind this cable modem; setting it to 0 blocks all CPE traffic from the modem, while leaving it unset falls back to docsSubMgtCpeMaxIpDefault (16).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.83.4.1.1.1.1 snmpwalk -v2c -c public <target> DOCS-SUBMGT-MIB::docsSubMgtCpeControlMaxCpeIp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.83.4.1.1.1.1.1 snmpget -v2c -c public <target> DOCS-SUBMGT-MIB::docsSubMgtCpeControlMaxCpeIp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.83.4.1.1.1.1.1 i <value>
Start monitoring DOCSIS CMTS (subscriber CPE IP control, vendor-neutral IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-SUBMGT-MIB::docsSubMgtCpeControlMaxCpeIp OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS (subscriber CPE IP control, vendor-neutral IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.83 | docsDev | EXP-DOCS-CABLE-DEVICE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.83.4 | docsSubMgt | DOCS-SUBMGT-MIB |
| 1.3.6.1.3.83.4.1 | docsSubMgtObjects | DOCS-SUBMGT-MIB |
| 1.3.6.1.3.83.4.1.1 | docsSubMgtCpeControlTable | DOCS-SUBMGT-MIB |
| 1.3.6.1.3.83.4.1.1.1 | docsSubMgtCpeControlEntry | DOCS-SUBMGT-MIB |
| 1.3.6.1.3.83.4.1.1.1.1 | docsSubMgtCpeControlMaxCpeIp | DOCS-SUBMGT-MIB |